How it works:
Matrix touch screen is the preferred solution for economic applications requiring little effort on installation. It consists of a conductive bottom layer (ITO Glass or Film) and a conductive top layer (ITO Film). The ITO coating forms rows on one layer and columns on the other. The two layers are suspended by many very small spacer dots.When a certain point is touched, it pushes the conductive coating on the top layer against the coating on the bottom layer. The action results into electrical contact functioning very similar to a switch.
Technical Specifications:
|
Circuiting Rating: 5V DC, 35mA |
Hitting Life Expectancy: Over 1 million |
|
|
Light Transmission: |
Film+Film>75% |
Input:Finger(with/without glove) Over 100,000 |
|
Film+Glass>80% |
Operating Temperature: -10 oC ~+60 oC |
|
|
Contact Bounce: <5ms |
Storage Temperature: -20 oC ~ +70 oC |
|
|
Operating Force: 10g~100g |
Choices of Glass Thickness: 0. 7mm, 1.1mm, 2.0mm, 3.0mm |
|
|
Surface Hardness: 3H |
Choices of Glass: NormalGlass, Chemically strengthened glass |
|
Benifit:
1.Low cost and good reliability.
2.Very easy to install(no need for controller).
3.Drift-free (no need for re-calibration).
4.100% customization (perfect solution for applications requiring limited numbers of fixed button sizes.)
GROWTH PROCESS
2021: The company has obtained 6 national patents.
2019: Increase investment of RMB 15 million and move into a new factory building (Foshan factory, introduce automatic printing production line, improve purification system, further improve the printing production environment, greatly increase production capacity), the factory area is 5000 square meters, with 1000 square meters of ten 10,000-level printing workshop, the annual sales of this factory area reached 6 million US dollars.
In October 2018, the Dongguan factory of the silicone factory was established.
Established PCBA Dongguan factory in December 2015.
March 2015: increased investment of 5 million RMB, and the plant area reached 2,500 square meters (relocated factory address)
2013: Established Guangzhou Jianming Electronic Technology Co., Ltd. for production and manufacturing, with a plant area of 1,300 square meters.
2005: The company was formally established, engaged in membrane switch, touch screen, PCBA, silica gel, plastic trade, and help foreign customers with various procurement services.
CUSTOM RAPID PROTOTYPING SERVICES
NEED HELP WITH YOUR NEXT PROJECT?
+86-020-8693 5969
